Oregon Scientific RA126 User Manual

Page 7

set up mode:

Bearing Tracking

Calibration

True north

Declination

CLOCK MODE

TO SET THE TIME AND DATE

1. Press MODE to navigate to Clock mode.
2. Press SET to navigate to time and date.
3. Press and hold SET to enter settings.
4. Press ST / SP / + to scroll upwards and COMPASS /

- to scroll downwards through the setting options. The
setting sequence is as follows: 12 / 24-hour time; hour;
minute; year; day-month / month-day; month; day;
temperature unit.

5. Press SET to conﬁrm.

NOTE

If no key is pressed for ten seconds, the display will

return to Clock mode.

STOPWATCH

SET

MODE

1. Press

MODE to navigate to Compass mode.

2. Press

SET to navigate to Compass with stopwatch.

3. Press

ST / SP / + to start and stop the stopwatch.

4. Press and hold SET to reset.

NOTE

Unless you stop the stopwatch, “

” will blink in

all modes to remind you that the stopwatch is still timing.
To view Compass with temperature:
• Press MODE to navigate to Compass mode.
• Press SET to navigate to Compass with temperature.

NOTE

The compass display is active for 30 seconds at a

time. After this, the compass will go into power saving mode
and “- - -” will appear on the display.
To re-activate the compass, press COMPASS.

RA126 IM EN R5.indd 6

2007.7.27 12:21:49 PM