Oregon Scientific MSR939A - Manual (Page 11)

EN
10
• Keep your product away from hot, humid conditions
or strong sunlight.
• Every effort has been made to ensure the highest
standards of reliability for your clock with remote
motion sensor. However, if something does go
wrong, please do not try to repair it yourself - consult
your supplier.
• Do not use your product outdoors in the rain, or
handle it with wet hands - water can damage
electrical equipment.
GETTING STARTED
PACKAGE CONTENTS
When you unpack your clock with remote motion sensor,
make sure you keep all the packing materials in a safe
place, in case you need to later transport the device or
return it for servicing.
In the box, you will find:
• Clock Unit
• Remote Motion Sensor
• 4 x UM-3 / AA 1.5V Batteries for the Clock
• 6V AC / DC Adaptor for the Clock
• 3 x UM-3 / AA 1.5V Batteries for the Remote Motion
Sensor
SAFETY AND CARE
SAFETY PRECAUTIONS
Please observe the following safety precautions when
setting up and using this product.
• LCD panel - The LCD panel is made of glass, and
may break if the unit is dropped.
• Heat sources - Keep the product away from heat
sources, such as radiators, stoves, heaters, and
other heat-generating products.
• Water and moisture - Do not use the product in or
near water or in high moisture areas, such as a
bathroom.
• Power source - The product may be susceptible to
power surges. It should be unplugged during severe
storms or whenever you will be away for a long time.
Only use the type of power source specified in this
manual. Do not overload power strips and extension
cords, as this can cause a fire hazard.
CARING FOR THIS PRODUCT
To ensure you receive the maximum benefit from using
this product, please observe the following guidelines.
• Do not clean any part of the product with benzene,
thinner or other solvent chemicals - this may cause
permanent damage that is not covered by the
guarantee. When necessary, clean it with a damp
cloth.
RMR939PA English R5 9/21/04, 2:40 PM 10