Orion STARMAX 9541 - Manual (Page 4)

4
Dovetail Holder: Secures the telescope into the mini-Dob
style mount by holding the dovetail bar preinstalled on the
telescope tube.
90° Star Diagonal: An adapter used on refractor and cata-
dioptric telescopes that positions the eyepiece to a more com-
fortable viewing angle and provides a right side up image.
GoScope 80 TableTop:
Objective Lens: The glass lens or lens system at the front
end of the optical tube. This is the light-gathering source for
the telescope.
Focus Knob: This knob makes an internal adjustment to the
optics to adjust the sharpness of the image.
Dovetail Holder: Secures the telescope into the mini-Dob
style mount by holding the dovetail bar preinstalled on the
telescope tube.
90° Star Diagonal: An adapter used on refractor and cata-
dioptric telescopes that positions the eyepiece to a more com-
fortable viewing angle and provides a right side up image.
Assembly
Assembly of the TableTop is very easy. Carefully remove the
protective packaging. Your TableTop arrives from the factory
with the optical tube attached to the base – just install the
visual accessories and you will be ready to start viewing with
your new telescope! These accessories will be found in a box
within the main box. Please save all original packaging. This
will help protect your TableTop if you wish to transport it or in
the unlikely event repair service is necessary.
Parts List
1 EZ Finder II reflex sight with bracket
1 25mm eyepiece (90mm model)
1 20mm eyepiece (80mm & 100mm models)
1 10mm eyepiece
1 Diagonal (Refractor and Maksutov-Cassegrain models
only)
Figure 1c: The GoScope 80 TableTop Telescope
Objective
lens
Finder scope
base
EZ Finder II
Reflex Sight
10mm
eyepiece
90° star
diagonal
20mm
eyepiece
Photo tripod
adapter
Altazimuth
tabletop base
Telescope
securing knob
Optical tube