Optiview Mini Speed Dome Camera - Manual (Page 18)

18
D. PRESET SET
To enter PRESET SET, move joystick to the right direction.
D-1. PRESET – PRESET NO.
Up to 165 numbers of preset positions are available. Move joystick to the right or left direction to
select preset no.
D-2. PRESET – PRESET ID
To set preset ID, select up to 16 characters using Joystick to the left or right.
Press ZOOM TELE button moves to the next character from the left to the right direction and
ZOOM WIDE button moves to the next character from the right to left direction
(Space displays when

appears)
D-3. PRESET – PAN: XXX.X TILT: XX.X
Press FOCUS FAR button in order to set preset position then, use the joystick to the position
where memorized preset no. is needed. Then press FOCUS FAR button again after setting a
preset location.
D-4. PRESET – SAVE
Move joystick to the right direction when the cursor is at SAVE and then the cursor will be located
on Preset ID for the continuous preset No. setting.
D-5. PRESET – EXIT
To escape this page, move joystick to the right direction.
PRESET SET
PRESET NO :001
PRESET ID :PRESET001-------
PAN :XXX.XX TILT : XXX.XX
SAVE
EXIT
DEFAULT SETTING
OSD MENU SETTING