Optimus CTR-109 - Manual (Page 8)

8
OPERATION
LOADING A CASSETTE
TAPE
1. Take up any slack in the tape by
turning one of the cassette’s hubs
with a pencil.
Caution: If you do not remove the
excess slack, the tape could
become tangled in the record/
playback mechanism.
2. Press STOP/EJECT to open the
cassette compartment door.
3. Load the cassette into the slot in
the door with its open edge out,
the side you want to play facing
up, and its full reel to the left.
4. Close the door.
PLAYING A CASSETTE
TAPE
1. Load the cassette tape.
2. Press PLAY . The cassette plays
until it reaches the end of the side,
then it automatically stops.
Notes:
• Press PAUSE to temporarily
stop playback. Press PAUSE
again to resume playback.
• If you hold down REWIND/
REVIEW or FAST-F/CUE while
the tape is playing, you can
hear the tape as it moves at a
faster speed. This makes it
easy to locate a specific part of
a recording. When you release
REWIND/REVIEW or FAST-F/
CUE , the tape plays at its nor-
mal speed.
MICROPHONE
PLAY REWIND FAST-F STOP PAUSE
EJECT REVIEW CUE
RECORD
MIC
PLAY REWIND FAST-F STOP PAUSE
EJECT REVIEW CUE
RECORD
CTR-109 CASSETTE RECORDER
AC / DC / BATTERY
14-1116.fm Page 8 Friday, January 8, 1999 10:30 AM