Orion Car Audio Cobalt CO154S - Manual (Page 6)

© 2007 directed electronics—all rights reserved 5
One Speaker (4 ohm voice coil)
One 4 ohm voice coil woofer results in a 4 ohm load to the amplifier .
+
+
4 ohm
_
_
Figure 3
Figura 3
Abbildung 3
. Connect the speaker by connecting the positive (+) terminal of the woofer to
the positive (+) terminal on the amplifier . Wire the negative (-) terminal of the
woofer to the negative (-) terminal on the amplifier .