On-Q/Legrand 364732-01 - Manual (Page 22)

19
301 Fulling Mill Road, Suite G ©Copyright 2004 by OnQ Technologies, Inc All Rights Reserved.
Middletown, PA 17057 www.onqhome.com
(800)-321-2343
Innovations in Home Living.
TCP/UDP Port Filter Filter using the port number. You can set filter for a
single port or a range of ports.
NOTE: Performing a Factory Reset will erase all previously entered device settings.
Filter/Forward
Select to Filter or Forward for the following
assigned port(s).
Single/Range You can filter a single port, or a range of ports
Port Number The port number(s) for the filters.
Port Type ƒ TCP port: filter according to the Connection-
Based Application Service on the remote
server using the port number.
ƒ UDP port: filter according to the
Connectionless Application Service on the
remote server using the port number.
ADD Each time you finish setting a filter, click the ADD button
and the added filter will appear on the Filter List
UNDO Click UNDO to clear all the settings in this categrory
Filter List
Displays all the Packet Filters.
DELETE ALL Click to delete all the filters on the list.
DELETE Click on the Index drop-down menu to select the
desired filter number and then click DELETE to
delete only the selected filter.