Rosewill RKV-2DVI User Manual

Page 8

USB 2.0 DVI KVM Switch

RKV-2DVI User Manual

Operation

The RKV-2DVI provides three convenient methods of selecting computers: Manual – click the pushbutton on the

Remote Port Selector; Mouse – click the mouse’s scroll wheel; and Hotkey – enter combinations from the keyboard.

Manual Port Selection

Press the port selection pushbutton on the Remote Port Selector to toggle the KVM and Audio focus between the

two computers. The Port LED lights to indicate that the computer attached to its corresponding port has the focus.

Note: Do not switch ports while a USB device is in operation. For independent USB switching, please see the USB

KVMP switches on our website.

Mouse Port Selection

Simply double-click the scroll wheel on your USB mouse to switch between ports. The mouse port-switching

function allows you to toggle back and forth between the ports.

Note: 1. This feature is only supported by USB 3-key scroll wheel mice.

2. The default setting is OFF.

3. This feature is only supported when mouse emulation is also enabled.

See Hotkey Summary Table, page 8 for further details.

Hotkey Port Selection

All hotkey operations begin by tapping the Scroll Lock key twice. See the Hotkey Summary Table for full details.

Note: If using [Scroll Lock] conflicts with other programs, [Ctrl] can be used instead.

Alternate Entering Hotkey Mode

♦

Press [Scroll Lock] [Scroll Lock] [x] [Enter]. The entering hotkey mode hotkey is now [Ctrl].

♦

Press and hold the remote port selector switch for three seconds. The entering hotkey mode hotkey is now

[Ctrl].

Note: These procedures toggle between the two methods.