Royal Sovereign 1650C - Manual (Page 6)

1. Set the glossy side of upper/lower film to face the heat.
( Glossy side is PET film and matte side is thermal polymer laminating film.)
2. Like picture 1, insert core into the left side of upper/lower film shaft.
3. Like picture 2 and 3, insert core into the right side of upper/lower film.
4. Like picture 4 and 5, adhere core closely.
(Make the right/left direction of fixing screw consistent.)
5. Locate film in the middle, and then fasten core fixing screw.
SETTING UP FILM
주 름 방 지 부 열 판 주 름 방 지 부 열 판 표 시 창 L C D 버 튼 부
COLD FILM
PAPER BACK
- 6 -