Assembly parts, It's not out of order, Check point – Royal Sovereign 1650C User Manual
Page 14: Cause symptom

CHECK POINT
*Rollers do not operate
1. Check the power cord.
after press RUN button
2. Check if the switch is on.
3. Check if the emergency switch
is off.
4. Check the s/w of safety cover is right.
*Wrinkled lamination
1. Adjust film tension.
result
6
BOLT CORE
8
Washer(Φ8)
6
Bolt(M8X12)
1. Power cord may not be plugged
in.
2. Power switch is at OFF mode.
3. Emergency switch may be at
1
1
Core(76mm)
FUSE(50T)
(AC250V 6.3A)
FUSE(65TS)
(AC250V 20A)
10
MODEL
PART NAME
ASSEMBLY PARTS
4. The safety cover is opened.
1. Film tension is not proper, too
tight.
MODEL
It's not out of order
Cause
Symptom
ON mode.
EA
EA
PART NAME
RSC-1650H
RSC-1650C
RSC-1650H
RSC-1650C
- 14 -
This manual is related to the following products: