Radio Shack TAD-729 - Manual (Page 15)

15
2. Press 3 (or twice) to select Area
Code .
3. Press SELECT , then enter your 3-
digit area code. If you make a mis-
take, repeatedly press or to
move the cursor over the incorrect
digit, then enter the correct number.
Note: If an area code is already
stored, it appears on the display. To
delete the area code, press
DEL/CH
three times. Then enter your area
code.
4. Press SELECT to store the area
code, then press CALL ID or return
the handset to the base to clear the
display.