Radio Shack 43-3549 - Manual (Page 22)

Memory Dialing
22
M
AKING
C
ALLS WITH
M
EMORY
D
IALING
Memory Dialing from Standby
Mode
1. Press MEM . The handset displays your
programmed memory locations.
2. Press VOL/RING or VOL/RING
keys, or enter the number ( 1 - 0 ) to
select the memory location you would
like to dial. Ô
3. Press TALK/FLASH . ¨ T T T Ta a a al l l lk k k k ¨ and the
volume setting appear on the display.
Then the displayed number is dialed. Ô
Memory Dialing from Talk Mode
1. Press TALK/FLASH . ¨ T T T Ta a a al l l lk k k k ¨ and the
volume setting appear.
2. Press MEM .
3. Press VOL/RING or VOL/RING keys
or enter a number ( 1 - 0 ) to select the
memory location of the desired phone
number. The selected name is
displayed. Ô
4. The phone number in the memory will
be dialed when SELECT is pressed.
5. To hang up, press END .
C HAIN D IALING
The memory locations on the handset are
not limited to phone numbers. You can also
store a group of numbers (up to 20 digits)
that you need to enter once your call
connects. This is referred to as Chain
Dialing.
Ô
NOTES
Ô
Memory Dialing from
Standby Mode
•
If you press SELECT or
MEM before TALK/
FLASH, you can
confirm the name and
the number stored in
the selected memory
location.
• To exit the memory
function without dialing,
press END. The
handset returns to the
standby mode.
• Whenever you are
using a memory menu
screen, you must press
a key within 30 seconds
or the phone will return
to the standby mode.
Memory Dialing from
Talk Mode
If you select a memory
location that does not have
a stored number, the
phone will not dial.
43-3549.fm Page 22 Tuesday, May 25, 2004 2:15 PM