RocketFish ROCKETBOOST RF-RBWS01 - Manual (Page 21)

21 RF-RBWS01
2 Press and hold the button on the wireless sender/receiver for more
than three seconds to put it into joining mode. The power indicator
starts blinking rapidly and the unit will stay in joining mode for 30
seconds.
3 Press and hold the button on the wireless speaker for more than three
seconds so the wireless sender/receiver and wireless speaker enter
joining mode.
• The power indicators light steadily if the joining was successful.
• The power indicators blink slowly if the joining was not successful.
Note : Rocketboost devices have their own memory. After the devices are joined once,
they will remember each other and join automatically when your devices are
powered on again. Because of this, you can join all of your network components in
the same room before installing them in their permanent locations throughout the
house.
Power on
indicator
Power on
indicator
RF-RBWSO1_11-0202_MAN_V1.fm Page 21 Monday, May 2, 2011 11:46 AM