RocketFish ROCKETBOOST RF-RBWS01 - Manual (Page 19)

19 RF-RBWS01
Using your wireless speaker system
Turning on the wireless sender/receiver and wireless
speaker
To turn the wireless sender/receiver on and off:
1 When initially connecting to an AC outlet, the device automatically turns
on. To turn off the device, press . The power indicator turns off and the
standby indicator turns red.
2 If the wireless sender/receiver is off, press to turn it on. The power
indicator lights.
To turn the wireless speaker on and off:
1 When initially connecting to an AC outlet, the device automatically turns
on. To turn off the device, press . The power indicator turns off and the
standby indicator turns red.
2 If the wireless speaker is off, press to turn it on. The power indicator
lights.
Establishing communication
Rocketboost products form an audio network and each Rocketboost
receiver can select the audio from any Rocketboost sender in the
network.
Important
Every Rocketboost network must contain one hub device, which
helps devices join the network. The network can have only one hub,
which you can enable using the hub switch on the back of all
Rocketboost senders and wireless sender/receivers.
If this is your first Rocketboost product, you should make the wireless
sender/receiver the hub, if you already have Rocketboost products,
you should disable hub mode on this device.
Important : Hub devices must always have power for your network to operate. The hub
device can be in standby (power saving) mode, but must stay plugged in.
RF-RBWSO1_11-0202_MAN_V1.fm Page 19 Monday, May 2, 2011 11:46 AM