RCA J27F636 - Manual (Page 36)

Chapter
Other Information
Menu Problems
• Menu access may be blocked by ClonePRO programming.
• Try unplugging the TV for two minutes and then plug it back in and turn it on.
• The Energy Saver settings won’t work if the TV Power is set to On Always in the Access and Power Options menu.
• The basic menu options might be restricted by master menu settings.
• The ClonePRO might have disabled master menus.
• Sleep and Schedule functions won’t work if the TV Power is set to On Always.
Care and Cleaning
CAUTION: Turn OFF your TV before cleaning.
You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate
ventilation.
The TV’s screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen. If necessary, you may use a cloth
dampened with warm water. Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder. These types of cleaners will
damage the TV.
While cleaning do not spray liquid directly on the screen, or allow liquid to run down the screen and inside the TV. Also, avoid placing drinks or vases with water
on top of the TV. This could increase the risk of fire or shock hazard or damage to the TV.
Caution:
Using video games or any external accessory with fixed images for extended periods of time can cause them to be permanently imprinted on the
picture tube (or projection TV picture tubes). ALSO, some network/program logos, phone numbers, etc. may cause similar damage. This damage is not
covered by your warranty.