ROWENTA 63016 User Manual

Page 3

BEFORE USE

Please read the instructions for use and the Important
Safeguards carefully.

Remove the sticker or transparent soleplate protector.

It is normal for a small amount of smoke to be produced
the first time the iron is used. This will quickly disappear.

ᕡ 3-WAY AUTO-OFF

(Depending on model)

If the iron is not moved while it is
plugged in, an internal safety switch
will turn it off. It will turn off in 8 min-
utes if left vertically or in 30 seconds if
left on its soleplate or tipped over. A
red flashing light indicates that the
auto-off has been activated. To switch
the iron on again, move the iron or
gently shake it. Wait until iron is fully
reheated before use.

Auto-off is not an on/off switch. Always unplug the iron
when it is not in use.

ᕢ STEAM IRONING

Filling with water

Ensure the iron is unplugged.

Slide the variable steam control
completely to the left.

Hold the appliance upright so that
the water inlet is horizontal.

Fill with water (containing no addi-
tives) to the max. water level mark.

Adding water

If you need to add water during ironing UNPLUG the iron
and repeat above steps.

Ensure iron is fully reheated after filling (pilot light goes out)
before ironing.

To avoid damage to clothes from dust or dirt that may
collect in the iron, we recommend that for the first use or
after the iron has been stored for some time that you first
iron an old cloth that can be discarded, testing both the
steam and burst of steam features.

ᕣ SELECTING THE TEMPERATURE

Set the temperature control dial
according to the type of fabric you
are ironing.
Check the fabric's label for appro-
priate setting.

VER

TIC

30 sec.

8 min.

30 sec.

min