Roberts Radio ecologic 6 - Manual (Page 23)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
22
To view set alarm times
1. Press the Alarm button, then press the Select button to enter alarm
setup.
2. Repeatedly press and release the Tuning Up/Down button to view
the current alarm settings.
1
2
2
1
To switch the alarm on or off
1. Press and release the Alarm button, "Set alarm" will show on the
display.
2. Repeatedly press and release the Tuning Up/Down button until
"Alarm On/Off" shows on the display.
3. Press the Select button to enter alarm status setup.
4. Repeatedly press and release the Tuning Up/Down button until the
desired alarm 1-4 is displayed.
5. To disable a set alarm press the Select button and the alarm symbol
(bell) will be removed from the display. The alarm will be cancelled.
6. To enable the set alarm press the Select button until the alarm symbol
(bell) shows on the display. The alarm will now activate at the set
time.
1
2,4
2,4
3,5,6