Roberts Radio ecologic 6 - Manual (Page 19)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
18
Auto preset stations - FM
Your clock radio will scan the entire FM band searching for stations. As
stations are found, they are stored in your clock radio preset memory
locations.
1. Press the On/Off button to switch on your radio.
2. If needed, press the Band button to select the FM band.
3. Press and hold the Menu/Info button until the display shows "Mono
override" on the lower line.
4. Press and release the Tuning Up/Down buttons until the display
shows "FM Scan".
5. Press the Select button to confi rm the scan.
Note: Some of the FM stations stored may be quite weak as the scan
stores stations regardless of their signal strength. Up to ten stations
will be stored. Presets can be modifi ed as needed using the procedure
described on page 6.
1
2
3
4
4
5