Using ac power, Connecting/ charging the battery – Radio Shack 43-3571 User Manual

Page 3

ing AC Power

room monitors, and other cordless
phones.

USING AC POWER

You can power the handset using the
supplied 9V, 210 mA AC adapter.

Insert the
supplied AC
adapter’s
barrel plug into
the

DC IN 9V

jack on the
back of the
charger. Route
the cord
through the
strain relief
slot and plug
the adapter into a standard AC outlet.

CONNECTING/

CHARGING THE

BATTERY

The phone comes with a rechargeable
nickel metal hydride (Ni-MH) battery
pack. Before using your phone, you
must install the battery pack, and then
charge it for about 15-20 hours.

CAUTION

You must use
a Class 2
power source

that supplies 9V DC and
delivers at least 210 mA.
Its center tip must be set
to positive and its plug
must fit the charger’s
DC IN 9V jack. The
supplied adapter meets
these specifications.
Using an adapter that
does not meet these
specifications could
damage the handset or
the adapter.

43-3538.0503.fm Page 3 Monday, January 5, 2004 1:25 PM