Radio Shack XTS 36 - Manual (Page 2)

RADIO SHACK
A Division of Tandy Corporation
Fort Worth, Texas 76102
7A5 Printed in Malaysia
5. Repeat Step 4 to insert one end of the pos-
itive bare wire into the red (positive) termi-
nal on the back of the speaker.
6. Using the wire’s color coding as a guide,
insert the other end of the negative bare
wire into your receiver or amplifier’s nega-
tive (–) speaker terminal.
7. Repeat Step 6 to connect the other end of
the positive bare wire into your receiver or
amplifier’s positive (+) speaker terminal.
8. You can place the speaker on a desk,
shelf, or table. You can also hang it on a
wall using the keyhole slot on the back of
the speaker.
+ –
R L
– +
Connections for Two Speakers
40-1994.fm Page 2 Wednesday, August 11, 1999 8:11 AM