Connections & setup, The front of your tv, Front input jacks – RCA HDTV User Manual
Page 27: Front panel, Chapter 1 25
Connections & Setup
Chapter 1
25
ME
NU
CH
CH
VO
L —
VO
L +
PO
WE
R
HEADPHONE
L/MONO R IN
AUDIO IN
VIDEO
CH
CH
VOL
MENU/OK
VOL
Power Indicator Light Status
On
TV is on
Off
TV is off (standby mode)
Blinks
Light blinks 5 times, pauses, and blinks again 5 times:
Lamp is trying to turn on. If the TV doesn’t turn on
after 5 minutes and then the light blinks steadily for
one minute, one of the following options is possible:
Lamp door may be open. Face the back of the TV.
Locate the door at the bottom of the TV and close it.
Turn off the TV and turn back on. The lamp should
turn on.
Lamp may be dead. You can replace the lamp
yourself. Go to page 69 for lamp replacement
information.
Power button
and indicator
Notes:
The front panel illustration shows a typical front panel layout. The
exact look may be different from the one on the front of your TV.
If you use the Front Button Block feature, the front panel no longer provides
access to the menus. The Front Button Block feature disables all front panel
buttons but not the jacks. For more information, see Chapter 3.
The Front of Your TV
Front Input Jacks
The TV has front input jacks for convenience in connecting a camcorder, digital camera, or video game
system. Look for a hinged door and press to open the cover. Please note the illustration below is just an
example of how these jacks might appear.
Notes:
When you plug in headphones, the TV’s internal speakers are muted. Use the VOL up or
down button to control the volume.
When connecting a device that uses a monaural cable, such as some camcorders, use the L/MONO
input jack to get sound from both speakers.
Front Panel
If you cannot locate your remote, you can use the front panel of your TV to operate many of the TV’s features.
MENU/OK Brings up the Main menu. When the menu system is displayed, pressing MENU/OK selects
highlighted items.
CH Scans down through the channel list. In the menu system, it moves the highlight down and adjusts
menu controls.
CH Scans up through the channel list. In the menu system, it moves the highlight up and adjusts menu
controls.
VOL Decreases the volume. In the menu system, it moves the highlight left to items and adjusts menu con-
trols.
VOL Increases the volume. In the menu system, it moves the highlight right to items and adjusts menu
controls.
(Power button and indicator) Turns the TV on and off. The indicator lights when TV is on. Your HDTV’s
lamp has a cool-down period when the TV is turned off, and a warm up period when the TV is turned on. If
you try to turn the TV on during a cool-down, you will hear audio and then the picture will be displayed after a
few moments. This could take up to one minute. For different light status of the indicator, see above.