Roberts Radio CD9909 - Manual (Page 4)

Aerials
The telescopic aerial (6) located on the rear of your CD radio cassette is for
FM reception. The telescopic aerial should be fully extended and angled for
optimum reception
There is a built in ferrite aerial for MW and LW stations. Rotate your CD radio
cassette to the position giving best reception.
Radio operation (FM)
Slide the Tape/Radio/CD switch (3) to the "Radio" position. Slide the
waveband switch (15) to the “FM position”. Adjust the volume control (5) until
a hissing sound is heard. Rotate the tuning control (17) until the desired
station is received. If the station being received is in 'Stereo' the stereo
indicator (14) will illuminate. Adjust the volume control (5) and tone control (1)
to the required settings.
To switch off the radio, slide the Tape/Radio/CD switch (3) to the "Off/Tape"
position.
Radio operation (MW and LW)
Slide the Tape/Radio/CD switch (3) to the "Radio" position". Slide the
waveband switch (15) to the “MW or LW” position. Adjust the volume control
(5) until a hissing sound is heard. Rotate the tuning control (17) until the
desired station is received. Adjust the volume control (5) and tone control (1)
to the required settings. Rotate your CD radio cassette to the position giving
best reception. To switch off the radio, slide the Tape/Radio/CD switch (3) to
the "Off/Tape" position.