beautypg.com

Srm-5ac, srm-6ac, Srm-5a, srm-6a, srm-6l, Asynchronous multipoint short range modems – RAD Data comm 146 User Manual

Page 4: Asynchronous short range modems

background image

M I N I A T U R E S H O R T R A N G E M O D E M S

149

RAD Data Communications 2006 Catalog

12

M
INIA

TUR

E SHOR

T R

ANG

E M

ODE

M
S

SRM-5AC, SRM-6AC

Asynchronous Multipoint Short Range Modems

The miniature SRM-5AC and SRM-6AC are

short range modems connecting full or half

duplex asynchronous terminals to

computers. Featuring carrier control, the

modems can be used in multipoint

applications and where end-to-end transfer

of a control signal is required. They operate

at data rates up to 19.2 kbps with a range

of up to 3.5 km (2.2 miles) over 24 AWG.

The SRM-5AC is a compatible sub-miniature

model of the SRM-6AC, offering the same

features in half the size.

The carrier can be strapped to be constantly

ON, or controlled by the Request to Send

signal. A switch-selectable DTE/DCE option

allows the modems to operate as a DTE for

connection to another DCE, without

requiring a cross cable.

The modems are available with an internal

filter (optional for the SRM-6AC). The filter

is designed to overcome radiated and

conducted interference for high noise

immunity.

Connection to the line is usually via a

5-screw (4-wire and ground) terminal block.

Optional connectors available for the

SRM-6AC are RJ-12 and RJ-45. The SRM-5AC

has both terminal block and RJ-12 or RJ-45

as its line connectors.

The modems are also available as a card for

mounting in a 19" rack (see the CMN-16

nest, card CMN-C6AC).

Visit www.rad.com for latest product updates

4-wire, full or half duplex

Controlled carrier for multipoint

Transfers one control signal

Data rates up to 19.2 kbps

Range up to 3.5 km (2.2 miles)

DCE/DTE switch

LED indicator for carrier detect (SRM-5AC only)

No external power required

Line connector options: terminal block,
RJ-12 and RJ-45

Available as a card for 19” rack

SRM-6AC

SRM-5AC

SRM-5AC

SRM-5AC

Async

computer

Async

terminal

TX

RX

RX

TX

RX

TX

RX

TX

SRM-5A, SRM-6A, SRM-6L

Asynchronous Short Range Modems

19.2 kbps with a range of 4.5 km (2.8 miles)

at 9.6 kbps. The SRM-6L operates at data

rates of up to 19.2 kbps up to a range of

3.2 km (2 miles).

The SRM-5A is fully compatible with the

SRM-6A and offers the same features in

half the size.

The SRM-6L offers the unique feature of

insensitivity to wire polarity: There is no

need to observe + and – connections when

using twisted pairs, making it easy to install

and maintain.

The DCE/DTE switch allows operation as a

DTE for connection to another DCE, without

requiring a cross cable. All three units

operate without external power by drawing

low power from the data and control signals.

Connection to the line is through isolation

transformers for protection against AC or DC

overvoltages.

The SRM-5A modem is available with an

internal filter (optional for the SRM-6A). The

filter is designed to overcome radiated and

conducted interference for high noise

immunity.

The SRM-6A is also available as a card for

mounting in a 19" rack (see the CMN-16

nest, card CMN-6A).

Approximate Range (for 24 AWG/0.5 mm)

Data Rate

kbps

km

miles

19.2

2.0

1.2

9.6

4.5

2.8

4.8

5.0

3.0

1.2–2.4

5.5

3.4

Visit www.rad.com for latest product updates

SRM-5A/6A: 4-wire, full duplex
SRM-6L: 4-wire, full or half duplex

Internal filter for high noise immunity
(SRM-5A)

Insensitive to wire polarity (SRM-6L)

Data rates up to 19.2 kbps

DCE/DTE switch

No external power required

Transformer line isolation

Available as a card for 19” rack (SRM-6A)

The miniature SRM-5A, SRM-6A and SRM-6L are

asynchronous short range modems connecting full

duplex asynchronous terminals to computers. The

SRM-5A and SRM-6A operate at data rates of up to

SRM-6A

Async

computer

4-wire

Async

terminal

SRM-5A

147-151_N.QXD 9/11/05 11:12 AM Page 3