ROTEL RR-969 - Manual (Page 4)

7 English 6 RR-969
Introduction
Thank you for purchasing the RR-969 Universal Learn-
ing Remote Control. The RR-969 can replace up to ten
infrared remote controls, operating audio or video
components from Rotel or other manufacturers.
Key Features
• Simple programming using your existing remotes
to teach the RR-969 their commands.
• Pre-programmed to operate Rotel Surround Sound
processors and receivers.
• LCD DISPLAY provides visual feedback during pro-
gramming and operation, including time of day, status
indicators, and customizable labels for every com-
mand button.
• Backlighting for ease of use in dark rooms along
with optional beep whenever a button is pressed.
• Twenty MACRO keys send a sequence of up to 20
commands with the press of two buttons.
• TIMER/ALARM function beeps at the programmed
time or sends a MACRO sequence.
Sensible Precautions
• The RR-969 is rugged, but it is not indestructible.
So please don’t drop it!
• Do not expose the RR-969 to moisture. To clean the
RR-969, use a soft, lint-free damp cloth. Avoid harsh
cleaning solvents.
• Don’t try to take the RR-969 apart. Disassembly will
void the warranty.
Battery Installation
Remove the RR-969 and the 4 AAA batteries from the
box. Turn the RR-969 over and lift the cover off the bat-
tery compartment by compressing the release tab and
lifting up. Place the four AAA batteries inside (follow
the polarity illustrations on the bottom of the compart-
ment) and replace the cover.
Navigating the RR-969
The RR-969 replaces up to ten remote controls. Teach-
ing the RR-969 to operate your components takes just
minutes and need only be done once. See the LEARN-
ING section of this manual for easy to follow instruc-
tions.
Once the programming is complete, select a compo-
nent with the press of a button to turn the RR-969 into
the remote control for your CD player, TV, or VCR.
Contents
Introduction .................................................. 7
Key Features
7
Sensible Precautions 7
Battery Installation 7
Navigating the RR-969 ................................. 7
IR Emitter/Sensor
8
LCD Display 8
Light Button and Light Sensor 8
Sliding Cover 8
Device Buttons 8
Basic Command Buttons 9
Secondary Command Buttons 9
Leaf Overlay 9
POWER and Multi-Step Buttons 9
Special Buttons 10
Configuration Buttons 10
Operating the RR-969 ................................. 10
Sending IR Commands
10
Sending Macro Commands 11
Multi-Step Button Operation 11
LIGHT Button 11
KEY TONE Button 11
Time/Alarm Feature 11
LOW BATTERY Indicator 12
Programming .............................................. 13
Learning Mode
13
Multi-Step Button Learning 13
Macro Programming 14
Clearing Stored Commands 15
Preload Function 15
Clone Function 15
Reset Button 16
Custom Labels ............................................. 16
Multi-language Mode
17
Button Labels 17