Raymarine Ray215 User Manual

Page 43

3-20 Operation with a Fist Microphone

7. Press the PTT key to send the Individual Ship's Call. After the digital

"packet" of information is sent, the radio waits for an acknowledgment
from the targeted ship or station.

8. If the target station acknowledges, a tone sounds and "ACK"

illuminates on the LCD. After 2 seconds, the RAY215 switches to the
previously selected working channel.

If the call is not acknowledged, exit the DSC mode by pressing 16/9.

Note: The operation is cancelled if the 16/9 key is pressed or if no keys
are pressed for 60 seconds during any part of this process.

PRESS & REL
DSC + D/L

PRESS & REL
SCAN

Radio enters DSC mode

ROTATE
CH

PRESS & REL
DSC

ROTATE
CH

[TX] Flashing

PRESS
DSC

Select working channel

ACK received from specified ship

Standby for ACK from specified ship

2 seconds after receiving ACK,
switches to selected channel

PRESS
PTT

Select letter assigned to desired MMSI

Returns to last used channel

To store an MMSI number in phonebook:
1. Press and release the DSC/PRI and D/L / I.C. keys simultaneously to

place the unit in DSC mode. "70" appears in the large channel display,
the DSC indicator illuminates, and "in" appears in the small channel
display to designate individual call.