RCA L23W10 - Manual (Page 11)

Connections & Setup
Chapter 1 7 Graphics contained within this publication are for representation only.
How to Connect: TV + VCR + DVD Player
1. Connect your cable or off-air antenna.
If you have cable or an off-air antenna, connect the cable or antenna to the Antenna In jack
on the VCR.
2. Connect your DVD Player to your TV.
A. Connect the audio (white and red) cables to the COMPONENT IN AUDIO R and L jacks
on the back of the TV and to the Audio Output jacks on the DVD player.
B. Connect three video grade cables to the COMPONENT IN Y Pb Pr jacks on the back of
the TV and to the Y Pb Pr outputs on the DVD player. If your DVD player doesn’t have
Y Pb Pr, but has an S-Video output, use the S-VIDEO jack.
Notes: If you are using an S-Video cable, you must also connect audio cables. The S-Video cable
only transfers video information.
If your DVD player has a component video output, we recommend you use the component video
input on the TV instead of the composite video or S-Video connection for better picture quality.
3. Connect your VCR to your TV.
A. Connect a coaxial cable to the Antenna Out jack on the VCR and to the ANTENNA IN
jack on the TV.
B. Connect the audio cables to the AUDIO IN R and L jacks (AUDIO IN 1, as shown above
for model L23W10) on the TV and to the Audio Output jacks on the VCR.
C. Connect the composite video cable to the VIDEO IN (VIDEO IN 1, as shown above for
model L23W10) on the TV and to the Video Output jack on the VCR.
Viewing the Components
1. Plug in the TV (see page 9 for details) and the components, if they aren’t already plugged
in. Turn on the TV and the component(s) you want to view.
2. Press the INPUT button on the remote control to scroll through the Video Input Channels.
• View the VCR on the VID channel (for models L1510 and L2010) or VID1 channel (for
model L23W10).
• View the DVD player on the CMPT (component video) channel.
DVD
VIDEO L R
OUT
AUDIO
S-VIDEO IN VIDEO IN 2 ANTENNA IN
24V DC
POWER IN PC IN
AUDIO IN 2
Pr Pb Y R L AUDIO IN PC-AUDIO IN L R VIDEO IN 1
AUDIO IN 1
L R
COMPONENT IN
PR PB Y S-VIDEO
ANTENNA IN
VIDEO AUDIO L R
ANTENNA OUT
IN OUT
VCR
VIDEO AUDIO L R
CABLE
2A 2B
3A
3C
3B
1
Notes: TV model L23W10
is shown here. The AUDIO
and VIDEO IN 2 jacks are only
available on this model.
The back of your DVD player
and VCR may not look exactly
like the ones shown here.
AFC030.indb 7 AFC030.indb 7 4/13/05 6:51:11 PM 4/13/05 6:51:11 PM