Roberts Radio CRD-39 - Manual (Page 14)

Operating your radio - FM
1. The Wire aerial located on the rear of your radio is for DAB/FM recep-
tion. The wire should be fully extended and positioned for optimum
reception.
2. Press the On/Off button to switch on your radio. The display will show
"Roberts DAB digital radio" for a few seconds.
3. Press the FM/DAB Band button to select the FM band.
4. Press and immediately release the Auto Tune button, your radio will
scan in an upwards direction (low frequency to high frequency) and
stop automatically when it fi nds a station of suffi cient strength.
5. After a few seconds the display will update and show station name.
6. To fi nd other stations press and release the AutoTune button as
before.
7. To scan the FM band in a downwards direction (high frequency to low
frequency) press and hold down the AutoTune button for 0.5 seconds
and then release.
8. When the waveband end is reached your radio will recommence tuning
from the opposite waveband end.
9. Adjust the Volume, treble and bass controls to the required
settings.
10. To switch off your radio press the On/Off button.
13
2 3
4
9
10
9
9