Roberts Radio RD4 - Manual (Page 20)

20
Displaying the Signal Level
While the radio is in play mode the Select button can be used to
display the current station Signal Level.
1. Pressing the Select button will display a bar graphic indicating
the signal level. The minimum required signal for this station is
presented as an open box on the bar.
2. Press the Select button to cancel the Signal Level function.
Adjusting the Volume Level
While the radio is in play mode the Select button can be used to
alter the volume.
1. Push the Select button up or down to increase or decrease the
volume.
2. For every two moves in a single direction a bar is added to or
removed from the Volume Level icon.
3. Pushing the Select button continuously in a single direction will
continue to alter the volume until the button is released or the
maximum/minimum level is reached.
4. When the radio is scanning or selecting stations the volume will
be muted - but the Volume Level icon will not change.