Roberts Radio RD4 - Manual (Page 10)

10
Hold switch
The Hold switch is used to prevent unintentional operation of your
radio.
1. Move the Hold switch on the top of the unit to the “Hold” position,
as indicated by the arrow. The power and all other buttons will
be disabled, this will prevent accidental operation when your
radio is packed in a suitcase or travel bag.
2. To prevent accidental operation of the controls when your radio is
switched on, move the Hold switch on the top of the unit to the
“Hold” position as indicated by the arrow.
3. To release the Hold switch, move the Hold switch on the top of
the unit to the “Off” position.