Radio Shack PPG850A - Manual (Page 3)

www.pyleaudio.com
3
Troubleshooting
Distorted Sound:
9
Check if the amplifier is
overdriven. If it is, you will have
to turn the level down.
9 Check signal source.
9 Check distortion effect control.
Turn to off for no effect.
Signal sounds “discolored”:
9 Check and adjust the EQ settings.
9 Ensure you are using quality
cables.
9 Check signal source.
No Sound:
9
Check connections.
9 Try a different cable.
9 Check levels on amplifier.
9 Confirm amplifier is getting a
signal.
9 Make sure nothing is plugged into
the Phones jack.
Intermittent Output:
9 Check connections.
9 Try a different cable.
Specifications
Model Driver RMS Peak Dimensions Weight
PPG850
12” High
Definition
Speaker
50W 300W
W = 17”
D = 11.5”
H = 19.25”
37 lb.