RCA SCT-530 - Manual (Page 7)

7
SPECIAL FEATURES
FAST-FORWARD/REWIND
To rapidly advance or rewind the tape, press FAST-F or
REWIND . To stop the tape, press STOP/EJECT . When the
tape reaches the end, the cassette deck automatically
stops.
PAUSE
To temporarily stop playback or recording, press PAUSE.
To restart, press
PAUSE again.
Note: You cannot pause while fast-forwarding or
rewinding.
USING CONTINUOUS PLAY
You can load two cassette tapes to play one after the other.
Notes:
• The cassettes you load should have the same Dolby
NR. type. If they do not, the tape that has a different
Dolby NR. type than the
DOLBY NR switch setting
might sound distorted.
• Be sure to set the tapes properly before starting
continuous play.
1. Load a cassette tape in each tape compartment,
then close the compartment doors.
2. Set DOLBY NR .
3. Press PLAY on Deck 2. The cassette in Deck
2 plays.
4. Adjust the volume, tone, and balance control
on your receiver/amplifier for the desired
sound.
5. Press PAUSE on Deck 1.
6. Press PLAY on Deck 1.
When Deck 2’s cassette tape ends, Deck 2 automatically
stops and Deck 1’s cassette tape plays. When Deck 1’s
cassette tape ends, Deck 1 automatically stops.
PRB1199A.En.01.09.DOC 9/2/99, 9:22 PM 7