Radio Shack 43-1088A - Manual (Page 16)

16
Chain-Dialing Service
Numbers
For quick recall of numbers for special
services (such as alternate long dis-
tance or bank by phone), store each
group of numbers in its own memory
location.
To use the stored special service infor-
mation, dial the service’s main number
first. Then, at the appropriate place in
the call, press
MEM and the number for
the location where the additional infor-
mation is stored.
Testing Stored Emergency
Numbers
If you store an emergency service’s
number (police department, fire de-
partment, ambulance) and you choose
to test the stored number, make the
test call during the late evening or early
morning hours to avoid peak demand
periods. Also, remain on the line to ex-
plain the reason for your call.
USING A HEADSET
You can make or answer calls with
hands-free convenience using an op-
tional headset that has a
3 /
32
-inch plug.
We recommend RadioShack Cat. No.
43-194, which is specially designed for
use with the ET-918/920.
To connect the headset, pull open the
rubber cover marked
on the side of
the handset, then insert the headset’s
3 /
32
-inch plug into the jack.
Notes:
• Connecting a headset discon-
nects the handset’s earpiece and
microphone.
• VOLUME on the handset (see
“Setting the Handset Volume” on
Page 12) also controls the con-
nected headset’s volume.
• If you place the handset on the
base to recharge it while the
headset is connected, be sure the
handset seats properly.
With a headset connected, you make
or answer calls as usual using the keys
on the handset.
When you finish using the headset,
disconnect it from the handset and
close the rubber cover to protect the
jack.
1088A90A.fm Page 16 Tuesday, August 17, 1999 8:46 AM