Radio Shack 22-218 User Manual
Page 31
31
Measuring AC Voltage on a DC Source Bias
WARNING: NEVER MEASURE MORE THAN 30 VOLTS AC
ON A DC SOURCE BIAS.
When an AC voltage has been superimposed on a DC source
bias, you cannot take ordinary measurements. The readings
wander on the scale and are not accurate.
However, if you know the approximate AC voltage and it does
not exceed 30 volts AC, you can measure it by connecting a
0.1 mF, 100-volt polyester film capacitor in series with the pos-
itive (+) voltage source and the meter’s red probe.
22-218.fm Page 31 Friday, August 6, 1999 11:44 AM