Ricoh G410 - Manual (Page 42)

31
FFFFF
Gently press the old ink ribbon car-
tridge down
➀ ➀ ➀ ➀ ➀ , and then pull it out ➁ ➁ ➁ ➁ ➁ .
GGGGG
Push a new ink ribbon cartridge into
the Endorser.
HHHHH
Align the endorser with the hooks on
the scanner as shown in the diagram.
D DD DD
Raise the rear portion of the Endorser,
and then pull the Endorser out.
Important
❒ Do not pull on the Endorser’s cord.
E EE EE
Place the Endorser down with the
printing section facing up.
Important
❒ Do not touch the printing section of the
Endorser. Doing so may get your fin-
gers dirty, and could damage the printing
section.
When Characters Printed by the Endorser are Too Light
or the Original Gets Dirty