Raymarine Radar equipment Raychart Chartplotter RC530 PLUS - Manual (Page 179)

Chapter 8: Installation 8-1
In
tro
du
ct
io
n
Chapter 8: Installation
8.1 Introduction
This chapter provides installation instructions for the hsb 2 series Color LCD
Display. Simple systems such as that in Figure 8-1 below, or integrated
systems (see Section 8.8) are explained. Details for mounting the hsb 2 series
LCD Display and connecting the equipment are included.
• To install a single hsb 2 series display unit follow the instructions in
Section 8.2 to Section 8.6.
If this display is a radar unit, you should then test the display as described in
Section 8.7.
• To connect your display to other equipment, follow the guidelines in
Section 8.8 and Section 8.9, taking particular care to ensure the correct
polarity of the SeaTalk supply.
• To install multiple displays, install the first display and any other equip-
ment, then test the system as described in Section 8.2 to Section 8.9. You
can then install additional displays.
• Details on installing the scanner are provided in the Pathfinder Plus
Radar Scanner Owner’s Handbook.
Figure 8-1: Typical System - Single Display Unit
NMEA
SeaTalk
Display Unit
Distribution Panel
D4288-2
Scanner
12/24V Supply
12V Supply 12V Supply
Junction
Box
GPS
Compass