Raymarine Radar equipment Raychart Chartplotter RC530 PLUS - Manual (Page 111)

Chapter 5: Standard Chart Operations 5-7
Displayi
ng
Ob
je
ct
In
fo
rm
at
io
n
select the character and up/down to increase/decrease the value.
The graph and tide data will be updated accordingly.
Nearest
➤ To obtain the information for the nearest port facility:
1. Move the cursor to the required position – this can be anywhere on the
chart and may be over an object – then press ENTER to display the object
information pop-up.
2. Press the NEAREST soft key. The port facility symbols are displayed.
3. Use the trackpad to highlight the required facility, then press ENTER.
4. The nearest ports providing that facility are listed with distance and bear-
ing to the port.
If you highlight a port name then press ENTER, details for that facility are
displayed. Typical port data is shown in Figure 5-4.
Press CLEAR to return to the port list.
Press CLEAR to return to the facility symbols.
5. Press CLEAR to return to the default display.
Figure 5-4: Nearest Port - Typical Data
D4255_1