Roberts Radio Vintage User Manual

Page 19

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)

Stereo / Mono setting - FM (headphones only)

Your radio will play stereo FM broadcasts in stereo provided that the
received signal is of adequate strength. However, as a stereo signal
becomes weaker the audio signal will become poorer. It may be preferable
to force the radio to play the station in mono in order to reduce the level
of background hiss.

1. Press

the

On/Off button to switch on your radio.

2. Tune to the required FM radio station as previously described (see

pages 13, 14).

3. Press and release the Tuning control so that the display shows 'Switch

to Mono'. The radio will play the current station in mono.

The Mono override is a temporary setting and is applied to the currently
tuned station only. It is cancelled automatically by tuning to another
station.

4. If you wish to cancel the Mono override while listening to the currently

tuned radio station, press and release the Tuning so that the display
shows 'Switch to Auto'. The radio will play the current station in stereo
if the signal is suffi ciently strong.

3-4