Rangemaster RC90 - Manual (Page 6)

4
pans wastes heat, and any spillage will be burnt on. Using a
lid will help the contents boil more quickly.
Always take care before touching the surface, even when the
hob is turned off. It may be hotter than you think!
Residual heat indicator, ‘H’
After use, a cooking zone will remain hot for a while as heat
dissipates. When a cooking zone is switched off the residual
heat indicator symbol, ‘H’, will appear in the display. This
shows that the cooking zone temperature is above 60°C and
may still cause burns. Once the temperature has dropped to
below 60°C the ‘H’ will go out.
The Control Panel
The control panel consists of touch sensitive controls to
operate the five cooking zones, the timer and child lock
features (Fig.2-5).
Operating the Hob
To switch on the hob press the On/Off key for about
2 seconds. Each of the control panel digital displays will
illuminate (Fig.2-6).
Note: If further hob functions are not activated within
10 seconds it will shut down automatically.
To activate a cooking zone:
Press the appropriate ‘+’ or ‘–‘ key to activate the required
cooking zone.
Pressing the ‘–‘ key will initially set the power level to 4
(Fig.2-7) while pressing the ‘+’ key will set the zone to 9,
full power (Fig.2-8), and activate the preheat function (see
below).
The power can be adjusted through a range from 1 to 9 by
pressing the ‘+’ key to increase, and the ‘–‘ key to decrease the
level.
ArtNo.315-0016 RC90 control panel
�
� � � � � � � � �
� �
�
�� �� � � �
Fig.2-5
1. Power ON/Power OFF
2. Cooking element ‘+’ key
3. Cooking element ‘–’ key
4. Cooking zone digital display 5. Dual element selector key
(Indicator light above)
6. Triple element selector key
(Indicator lights above)
ArtNo.315-0017 RC90 controls ON
Fig.2-6
ArtNo.315-0019 RC90 zone set to 4
Fig.2-7
7. Timer key
8. Timer ‘+’ key
9. Timer ‘–’ key
10. Timer digital display 11. Child lock key
(Indicator light above)
ArtNo.315-0019 RC90 zone set to 4
Fig.2-8