RCA G36710 - Manual (Page 5)

Chapter 1 3
Connections & Setup
TV (back panel)
P R P B
R-AUDIO-L VIDEO
Y
CABLE/
ANTENNA
S-VIDEO G-LINK
R L
INPUT
2
R-AUDIO-L VIDEO
INPUT1
AUDIO
OUT
IN FROM ANT
OUT TO TV
CH3
CH4
VCR
VIDEO
OUT
L R
AUDIO
IN
L R
From Cable
or Antenna
VCR
2
3
1A
1B
1C
TV
TV + VCR
1. Connect your TV to your VCR
A. Connect a coaxial cable to the CABLE/ANTENNA jack on your TV and to the Output Jack on your VCR (sometimes labeled OUT TO TV).
B. Connect the audio/video cables. Connect audio cables (white and red) to the INPUT1 AUDIO R and L jacks on the back of the TV and to the
Audio Output Jacks on the VCR (sometimes labeled OUT R L).
C. Connect the video cable (yellow) to the INPUT1 VIDEO jack on the back of the TV and to the Video Output Jack on the VCR.
2. Connect cable or antenna to your VCR
Connect the coaxial cable from your cable outlet or antenna to the Input Jack on your VCR (sometimes labeled IN FROM ANTENNA or IN FROM
ANT).
3. Connect the G-LINK cable to the TV
If you haven’t already done so, remove the Demo Pin from the G-LINK jack. Then, connect the G-LINK cable to the G-LINK jack on the TV. Next
step, place one of the wands of the G-LINK cable to work with your VCR (instructions are on page 5).
Go to page 5