Roberts Radio R972 - Manual (Page 10)

Storing stations in preset memories
Turn on the radio by pressing the Power button (1), select the FM or AM
(MW) band by pressing the Waveband selection button (10). Tune to
the desired station using Scan or manual tuning as previously described.
Press the Memory button (6) the Display (2) will flash ‘M’ . Whilst the
display is flashing select the desired memory position using the Tuning
up (4) or Tuning down button (3). Press the Memory button (6) to store
the station in the selected memory position. You may store up to 15
stations on FM and 6 stations on AM (MW).
Note:
If a station has been previously stored in memory pressing the Memory
button will cause both the ‘M’ and preset number digit to flash in the
display.