Rogue Audio TEMPEST II - Manual (Page 4)

3
Figure 1 Tube and Deck Layout
INSTALLING THE TEMPEST II INTO YOUR SYSTEM
Amplifier Location:
The Tempest II depends on natural convection flow patterns for proper cooling.
To ensure proper cooling, the unit should be located in a position so that the
airflow is not impeded. The unit should not be placed in a fully enclosed shelf,
and should have a minimum of 8 inches of free space above it, and 6 inches of
free space on either side.
Connecting the Tempest II to the Loudspeakers:
The Tempest II provides options for either 4 or 8 ohm speakers. The impedance
selected will depend on the speakers used. Consult either the owner’s manual for
Left Binding Post
Right Binding Post
Bias Meter
Rotary Bias
Switch Potentiometers
V1 V2 V4 V3
12AX7
6SN7
12AX7
6SN7
External/Internal
Preamp Shunts