Ricoh Lens A16 - Manual (Page 53)

Caution ----------------------------------------------------------------------------------
The lens cap (LC-3) and lens hood (LH-2) cannot be used together.
If the lens hood (LH-2) is attached when the lens cap (LC-3) is already
attached, the lens cap may break.
Removing/attaching the ring cap -------------------------------------------------
Remove the ring cap when using the optional ring cap (LC-3).
Removing the ring cap
Turn the ring cap counterclockwise while the
camera is turned off and remove from the
camera unit.
Attaching the ring cap
With the camera turned off, align the
marking on the ring cap (2) with the
marking on the camera unit (1) and turn
the ring cap clockwise until it clicks.
1
2
1
2