Radio Shack 20-197 - Manual (Page 3)

©2008. RadioShack Corporation.
All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
11A08
20-106/20-197
20–106/20–197 Special Global Menu Information
Menu Name Menu Help Text Default Values Win500 Name PSR Edit Name Setting Type Description/Notes
SubaudDelay Delay before we start subau-
dible decode 150 0–65535,
x1 ms Subaudible start
delay Delay Time Motorola Trunking Length of time to wait to check for Motorola subaudible
data to decode
M36 ET Patt Mot3600 Endtone 16–bit pat-
tern to detect 2B2B 0x0000–
0xFFFF Endtone pattern End Tone Pattern Motorola Trunking The Motorola 3600 End Tone 16–bit pattern to detect an
end of signal command
EndtoneMot # of >baud bits to trig
3600CC analog end 250 0–250 Endtone threshold End Tone Threshold Motorola Trunking The Motorola 3600 End Tone number of bits required to
mute at end of signal
EndtoneEDACS # of >baud bits to trig
4800CC analog end 10 0–250 Endtone threshold End Tone Threshold EDACS Trunking The EDACS 4800 End Tone number of bits required to
mute at end of signal
EDACS UnMute EDACS unmute delay 18 0–100,
x10 ms GCG unmute delay GCG Unmute Delay EDACS Trunking Length of time to wait before unumuting an EDACS trunk-
ing signal
EDACS ET HO EDACS post end–tone hold-
off 35 0–100,
x10 ms Endtone holdoff End Tone Holdoff EDACS Trunking Length of time to wait after an EDACS end of signal com-
mand
Trunking Ch# Show CC Chan # while show-
ing VC Off Off/On Show trunked chan
w/VC Show Trunking Channel Misc Setting Show the trunking channel number on the display
CCDump Dump CC msgs to PC/IF No No/Yes Dump trunking data
to PC/IF Enable CC Dump Misc Setting Enable the Control Channel Dump feature
DSPDump Dump CPU<–>DSP msgs to
PC/IF No No/Yes Echo DSP comms to
PC/IF Enable DSP Dump Misc Setting Enable the DSP Dump feature
Abbreviations
CC = Control Channel
CSQ = Carrier Squelch
DG = Digital
ET = End Tone
HD2 = in DG, P25 CC detect, in CTCSS/DCS, reverse
burst/turn off code detect
HD5 = CTCSS/DCS/NAC detect
HW = Hardware
SQ = Squelch
VC = Voice Channel
WX = Weather
XF = IMBE detect
ZM = Zeromatic