Radio Shack 20-197 User Manual
Page 2
©2008.
RadioShack Corporation.
All rights reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
11A08
20-106/20-197
20–106/20–197 Special Global Menu Information
Menu Name
Menu Help Text
Default
Values
Win500 Name
PSR Edit Name
Setting Type
Description/Notes
SearchTunes
Max search tunes per scan
loop 0=entire range
0
0–9999
tunes
SRCH tunes in SCAN
Max Search Tunes per
Scan Cycle
General Tuning
Maximum number of frequencies to check in each search
object while scanning
FlexStep
On= Allow any 1250Hz freq
Off=enforce fixed steps
Off
Off/On
Enable FlexStep
Enable FlexStep
Misc Setting
Enable the FlexStep feature
ADC Cal
Show various data within Tune
Mode on LCD line 3
OFF
OFF,
RSSI, ZM,
DSP
TUNE mode display
Tune Mode Text
Misc Setting
Customize the text to show on the display while tuning
RSSI Sig Cal
Signal strength meter thresh-
olds
1–750
RSSI Bar Thresholds
Signal Strength Values
Misc Setting
Customize the signal strength meter bar threshold values
for RSSI bars 1–5
Bat Icon Cal
Battery icon thresholds
1–1023
Battery Settings
Misc Setting
Customize the battery icon threshold values for NiMH, al-
kaline, and NiCd type batteries (icon off, icon on, icon blink
off, icon blink on)
Zeromatc Cal
Zeromatic tune thresholds
1–1023
Zeromatic Thresholds
ZeroMatic Settings
Zeromatic Setting
Customize the Zeromatic tune threshhold values for 5kHz
ranges and non-5kHz ranges (entrance low value and high
value, exit low value and high value)
ZM Delay
Zeromatic check delay
5
0–1000,
x1 ms
ZM Check delay
Check Delay
Zeromatic Setting
ACSQ SrcInt
Wait for HD5 sig in auto CSQ
srch
500
10–2000,
x1 ms
Search Interval
Search Delay
CTCSS/DCS/NAC
Length of time to wait for a CTCSS/DCS/NAC signal in
auto (au) carrier squelch search
ACSQ PolInt
Interval to poll for CSQ value
100
10–1000,
x1 ms
Query Interval
Query Interval
CTCSS/DCS/NAC
Interval of time to check for a CTCSS/DCS/NAC signal
HD5 Fade
CSQ fade delay
2000
10–2500,
x1 ms
Fade Timeout
Fade Delay
CTCSS/DCS/NAC
Length of time to wait after losing a CTCSS/DCS/NAC
signal
HD2 Qualify
CSQ end detect threshold
75
1–1000,
x1 ms
End detect qualify
Qualify Time (Analog)
CTCSS/DCS/NAC
Length of time to check to detect an end of signal turn off
code command
HD2 Holdoff
CSQ post–end wait time
500
10–1000,
x1 ms
Delay after end
Mute Time
CTCSS/DCS/NAC
Length of time to mute a signal after an end of signal turn
off code command
96CC HD2 TO
9600CC SQ to HD2 timeout
30
10–250,
x10 ms
CC detect timeout
CC HD2 Timeout
P25 Trunking
Length of time to wait for P25 control channel detection
timeout
96VC SQ TO
9600VC RF SQ timeout
50
10–250,
x10 ms
VC RF SQ timeout
VC SQ Timeout
P25 Trunking
Length of time to wait for P25 voice channel RF squelch
timeout
96VC XF TO
9600VC SQ to XF timeout
100
10–250,
x10 ms
VC Digital timeout
VC XF Timeout
P25 Trunking
Length of time to wait for P25 voice channel digital IMBE
timeout
HD2 Qual DG
HD2 qual time to unmute
96CC
100
10–250,
x10 ms
Qualify CC in analyze
Qualify Time (Digital)
P25 Trunking
Length of time to check for a P25 control channel before
unmuting in Analyze