Razor SPORTMOD 15130412 - Manual (Page 3)

Remove contents from box. Remove the foam separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during
shipping. Because the Sport Mod was 95 percent assembled and packed at the factory, there should not be any
problems, even if the box has a few scars or dents.
q
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 15 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge (see page 3 for charging information).
BEFORE YOU BEGIN
2
WARNING: DO
NOT USE NON-RAZOR
PRODUCTS WITH YOUR
RAZOR SPORT MOD.
The Sport Mod has been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
or may not be compatible.
q Required Tools
Some tools may be supplied; however, we recommend the use of mechanic’s grade tools. Use the supplied tools only
as a last resort.
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com
or call toll-free at
866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
3mm and 6mm
hexagonal key wrenches
(included)
Bicycle-style tire pump
for Schrader valve tires,
with pressure gauge
Kick Stand
Brake Lever
Brake Lever
Adjuster
Chain Guard
Speed Control
Front Fork
Charger
Charger
Plug
Charger
Port
Tire
Front Wheel
On/Off
Switch
Charger
Port
Fuse Box
Battery
8mm, 10mm and 17mm
wrenches
Phillips screwdriver