Roberts Radio CR9933 - Manual (Page 7)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
MW FM
6
Tuning
On
Listening to the radio
1. Switch on the radio by pressing the On button.
2. Select the required waveband using the Waveband selector switch.
3. Tune in to the desired station by rotating the Tuning control. The
station frequency is indicated by the Dial pointer.
The Wire aerial located on the rear of your clock radio is for FM
reception. The wire should be fully extended and positioned for
optimum reception.
For MW reception there is a built in ferrite aerial. Rotate your clock
radio to the position giving best reception.
4. Adjust the volume by rotating the Volume control.
5. The radio can be switched off by pressing the Off button.
2
3
Off
1
4
5