Roberts Radio Gemini 33 CRD-33 - Manual (Page 44)

Backlight for clock and display
When you fi rst plug it in your clock radio sets the clock and display back-
light to maximum brightness. The backlight button can be used to switch
between this and a lower level of illumination which is set using the small
adjustment wheel on the underside of the radio.
1. Press and release the backlight button to select the alternate set-
ting.
2. Turn the brightness wheel on the underside of the clock radio anti-
clockwise to lower the brightness. Turn the wheel clockwise to increase
the brightness.
3. Press and release the backlight button again to re-select the maxi-
mum brightness level if needed.
43
1