Ryobi 227RJ - Manual (Page 23)

English –
23
TECHNICAL DATA
Technical data
Engine
Cylinder capacity, cm 3
Cylinder bore, mm
Stroke length, mm
Idling speed, rpm
Recommended max. speed, rpm
Speed of output axle, rpm
Max. engine output, acc. to ISO 8893
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, mm
Fuel lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, litres
Weight
Weight without fuel, cutting tool and
guard, kg
Noise levels
Equivalent noise pressure level at the
user’s ear, measured according to EN
11806 and ISO 7917, dB(A), min/max:
Equivalent noise power level at the user’s
ear, measured according to EN 11806
and ISO 10884, dB(A), min/max:
Vibration levels
Vibration levels on the handles,
measured according to EN 11806 and
ISO 7916, m/s
When idling, left/right handles, min:
When idling, left/right handles, max:
At max. speed, left/right handles, min:
At max. speed, left/right handles, max:
NOTE!
Noise and vibration measurements are made with all the machine’s approved cutting equipment fitted.
The table indicates the highest and lowest values.
232RJ
30,8
35
32
2 700
11 000-11 700
10 000
1,1 kW/8 400 rpm
Yes
Yes
Walbro CD
Champion RCJ 7Y
0,5
Walbro WT
0,5
6,4
92/98
103/108
2,2/2,0
3,0/3,0
4,5/2,5
6,5/4,5
227RJ
26,9
35
28
2 700
11 000-11 700
10 000
1,0 kW/9 000 rpm
Yes
Yes
Walbro CD
Champion RCJ 7Y
0,5
Walbro WT
0,5
6,0
93/98
103/109
3,1/2,8
3,5/4,0
2,6/3,3
4,6/5,1
240RJ
36,3
38
32
2 700
11 000-11 700
10 000
1,3 kW/9 000 rpm
Yes
Yes
Walbro CD
Champion RCJ 7Y
0,5
Walbro WT
0,5
6,4
98/101
106/112
3,1/3,0
4,0/3,8
6,4/8,2
7,7/11,0