Radio Shack 420 - Manual (Page 14)

14
2. Plug the triplex adapter into the modular phone jack.
3. Plug one end of the supplied modular cord into the TEL.
LINE jack on one of the systems.
4. Plug the other end of the modular cord into either L1 or
L2 on the triplex adapter.
5. Repeat Steps 3 and 4 to connect another system to the
remaining open jack ( L1 or L2 ) on the triplex adapter.
Connecting to an Answering Machine
1. Unplug the answering machine’s modular cord from its
line jack and plug this cord into the system’s TEL. LINE
jack.
2. Plug one end of the supplied modular cord into the sys-
tem’s PHONE jack, then plug the other end of the cord
into the answering machine’s line jack.
3. Set the answering machine to answer calls after at least
two rings.
43-971.fm Page 14 Monday, August 16, 1999 4:12 PM