Radio Shack 420 - Manual (Page 11)

11
1. Insert the AC adapter’s barrel plug into the DC 9V jack on
the back of the system.
2. Plug the other end of the AC adapter into a standard AC
outlet.
RESETTING THE SYSTEM
Before you use the system the first time or to reset the sys-
tem’s clock any time, use a pointed object, such as a straight-
ened paper clip, to press
RESET on the back of the system.
12-00-00A appears. This resets the clock and the area
code; it does not clear any stored call information.
Note: If the system does not work after you reset it, remove
the batteries (this clears all stored call information), disconnect
the system from the phone line and the AC outlet, replace the
batteries with fresh ones (if necessary), then reconnect it and
try resetting it again.
43-971.fm Page 11 Monday, August 16, 1999 4:12 PM